<h1><span style="color: #069ce8;">TATOO</span>&nbsp;NYLON</h1>


Low temperature PU film, designed to be heat transferred to most coated fabrics (such as nylon fabrics).


Nylon fabrics are made out of polyamide fibers and heat-transferring films on nylon fabrics often results in an adhesion issue.
This adhesion issue is not because of the nylon fiber itself but because of the water-repellent coating it has received. The water proofing coating not only repels water but also the hot melt adhesives used in standard films.
FlexCut Nylon contains a specifically designed low temperature hot melt adhesive and is the perfect solution to nylon adhesion problems. An easy test with a drop of water on the fabric will tell you if you should use Tatoo Nylon.


> Waterbased PU
> Thickness (without liner): 70μ
> Printable with Eco-solvent, Solvent, Latex, and UV-Ink

> Transfer Temperature: 115°C
> Transfer Time: 15 seconds
> Pressure: Medium

> Fastness: 40°C


packaging cm blue

packaging meter blue

50 cm (19,7“)

10 meters (10,9 yd)

50 cm (19,7“)

25 meters (27.3 yd)

75 cm (29,5“)

10 meters (10,9 yd)

75 cm (29,5“)

25 meters (27,3 yd)


Application - Coton


Application - Polyester


Application - Nylon